Our Technology

Hydrogy SA will be a major actor in the field of « RES to H» by using the pressurised alkaline electrolysers for their best technical and economical characteristics proven by decades of field experience, such as:

  • Safe, efficient and cost saving operation.
  • Adapted to fast and big load changes as well as frequent start up and shut down.
  • High reactivity (short response times after input changes)
  • Minimum Energy consumption. 
  • Minimum maintenance and remote control operations.
  • Long life cycles and low LCC’s.
  • High gas purities.
Our prototype 1

Hydrogy focuses its activities on two main fields:

  • Energy storage : excess renewable energy is transformed into hydrogen and stored.
  • The hydrogen can later be used for multiple purposes (fuel cell, process gas etc) in fields such as:
    • mobility
    • grid regulation
    • domestic
      • And others
  • Decarbonation :  oxygen instead of air is supplied to a combustion system for an efficient capture of the CO2 in flue gas that « only » contains H2O and CO2.
  • The captured CO2 is then methanised by reacting with the hydrogen to produce synthetic natural gas (SNR)
According to its long experience and the results issued from its R&D program, the operating data and the expected performance of Hydrogy’s electrolyser are :
Operating pressure32bar
Operating temperature110°C
Gas purity at MCR>99,99 Vol %
KOH concentration30%
Load range25% – 100%
Stand by mode8bar, 60°C 
Energy consumption< 4kWh/Nm3 H2
Demi-water consumption0.8l /Nm3 H2